53
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
<INITIAL SET UP/INFORMATION>
♦
HDD REPEAT PLAY
The contents recorded on the HDD (Hard Disk Drive) can
be repeatedly played back.
#1
#1
#2
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
>>HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
#1.Appears when “ARCHIVE•COPY” is set to
ID4•ID5 on the screen.
#2.Appears when “PARTITION” is set and
“ARCHIVE•COPY” is set to ID4•ID5 respectively
on the screen.
Setting ( default : “OFF” )
“ON” : After the recorded data is played back to the
end, playback is resumed by automatically return-
ing to the beginning of the recorded data.
“OFF” : After the recorded data is played back to
the end, playback is stopped.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “HDD REPEAT PLAY” in the
<HDD SETTINGS> screen. Display the desired setting and
confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button to exit.
♦
IM-CHECK PLAY
This function is to check whether alterations have been
made to the recorded video or the recording date/time.
“IMAGE MODIFIED” warning is displayed when alteration
is found.
#1
#1
#2
#1.Appears when “ARCHIVE•COPY” is set to
ID4•ID5 on the screen.
#2.Appears when “PARTITION” is set and
“ARCHIVE•COPY” is set to ID4•ID5 respectively
on the screen.
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT PLAY OFF
>>IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
Setting ( default : “OFF” )
“ON” : Alteration check is performed during play-
back and displays a warning at the point containing
alteration.
“OFF” : Alteration check is not performed.
This function may cause problems during re-
cording and playback. Normally, set this function to
“OFF”.
■
HDD SETTINGS
♦
HDD REPEAT REC MAIN/
HDD REPEAT REC SUB
Operation when HDD (Hard Disk Drive) space is full.
#1.Appears when “ARCHIVE•COPY” is set to
ID4•ID5 on the screen.
#2.Appears when “PARTITION” is set and
“ARCHIVE•COPY” is set to ID4•ID5 respectively
on the screen.
#1
#1
#2
<HDD SETTINGS>
>>HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
“HDD REPEAT REC SUB” appears when “PAR-
TITION” is selected on “HDD SETTING” of the <INI-
TIALIZATION> screen.
Setting ( default of HDD REPEAT REC MAIN : “ON”, de-
fault of HDD REPEAT REC SUB : “OFF”)
“ON” : Automatically returns to the beginning of the
HDD and resumes recording (by overwriting old
data).
“STANDBY” : When the HDD space becomes FULL,
recording is stopped and the unit switches to the
standby mode. Recording is resumed when the REC
terminal is grounded or the REC button is pressed.
Recording is temporarily stopped if the alarm input
is continuously grounded or during timer recording.
Then, recording is resumed from the beginning of
the HDD.
“OFF” : Recording is stopped and “REC/FULL” or
“REC/SUB FULL” is displayed on the screen. To
resume recording, press the WARNING RESET
button to cancel the warning display and press the
REC button.
When an error occurs with a HDD, only the HDD
with the warning is affected, all other drives with no
warning will continue to record.
“STANDBY” is displayed only in “HDD REPEAT
REC MAIN”.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “HDD REPEAT REC MAIN” or
“HDD REPEAT REC SUB” in the <HDD SETTINGS> screen.
Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
Содержание DX-TL2500U
Страница 100: ...872C276A0 PRINTED IN JAPAN ...