background image

English

English-21

Power Indicator

Status

Power ON

Green

Power OFF

Red
Red On
Green Blinking

Power Standby

Red, Green
Red Blinking
*

Power Standby when 
“SCHEDULE” is enable

Diagnosis
(Detecting failure)

See troubleshooting on 
page 38

Using Power Management

The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a 

fi

 xed period.

The power management feature on your new display has
been set to the “ON” mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.

Picture Size

FULL

NORMAL

DYNAMIC

CUSTOM

REAL

FULL

NORMAL

CUSTOM

REAL

Signal Type

NORMAL

DYNAMIC

FULL

4:3

Squeeze

NORMAL SIZE

Recommended Size

RGB 1, 2, 3, 4, 5

DVD/HD, VIDEO<S>,

VIDEO

NORMAL: 

Display by the inputed signal aspect ratio by PC 

signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO 
signal.

FULL:

 Display in entire screen.

DYNAMIC:

  Expand 4:3 pictures to the entire screen with 

non-linearity. (Some round image will be cut by expansion.)

CUSTOM (ZOOM):

 Image can be expanded beyond the 

active display area. The image which is outside of active dia-
play area is not displayed.

REAL:

 Image will be displayed 1 by 1 pixel.

 

ZOOM

ZOOM

Picture Mode

Audio Source Switching

You can switch the audio source using the AUDIO INPUT 
button. 

Control Lock Mode

This function disables the operation buttons so that the ad-
justments you make are not changed when they are pressed. 
To disable the buttons, press and hold down the   and   
buttons together for at least 3 seconds.
To enable the buttons, press and hold down the   and   
buttons together for at least 3 seconds again.

HDMI

AUDIO1

AUDIO2

AUDIO3

AUDIO1

AUDIO2

AUDIO3

RGB 1, 2

Other than 

RGB 1, 2

HIGHBRIGHT

STANDARD

sRGB

HIGHBRIGHT

STANDARD

CINEMA

RGB 1, 2, 3, 4, 5

DVD/HD, VIDEO<S>,

VIDEO

Содержание DT851













































Отзывы: