EN-10
Setting up your projector
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection
angle of the projector. (See page 1.)
Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of
the screen center.
Do not install the screen where it is exposed to direct sunlight or lighting. Light directly reflecting on the screen
makes the projected images washed-out and hard to view.
SCREEN SIZE
You can keep the image display area within the screen by setting SCREEN SIZE in the ADVANCED MENU of IMAGE
menu according to the aspect ratio of the actual screen. Select 16:9 when the aspect ratio of the screen is 16:9 or 4:,
and select CINEMA SCOPE (.5:1) when the aspect ratio is .5:1 (CinemaScope).
When setting SCREEN SIZE to CINEMA SCOPE (.5:1):
CinemaScope size movies are projected in the full screen.
Set ASPECT in the FEATURE menu to 16:9 when displaying Vista-size images. In this case, they are squeezed
horizontally.
When ASPECT in the FEATURE menu is set to AUTO and 480i/p, 576i/p, 70p, or 1080i/p signal is input, the part
for displaying subtitles is not projected. To display subtitles, reset SCREEN SIZE to 16:9 and adjust the image
position using VERTICAL LOCATION in the ADVANCED MENU of the IMAGE menu. (To display the menu on the
screen, adjust SHUTTER(U) in the SIGNAL - USER menu to position the menu.)
Screen size and projection distance
Refer to the following tables to determine the screen size and projection distance.
The figures in the tables are approximate and may be slightly different from the actual measurements.
SW
Hd
SH
Center of the lens
(Width of the projected image)
Projection distance (L)
(H
ei
gh
t o
f t
he
pr
oj
ec
te
d
im
ag
e)
Screen size
When the aspect ratio of the screen is 16:9
Screen size
Projection distance (L)
Hd
Diagonal size
Height (SH)
Width (SW)
Shortest (Wide)
Longest (Tele)
inch
cm
inch
cm
inch
cm
inch
m
inch
m
inch
cm
50
17
5
6
44
111
59
1.5
89
.
8.
1
60
15
9
75
5
1
71
1.8
107
.7
9.9
5
70
178
4
87
61
155
84
.1
15
.
11.5
9
80
0
9
100
70
177
96
.4
144
.6
1.
4
90
9
44
11
78
199
108
.7
16
4.1
14.8
8
100
54
49
15
87
1
10
.1
180
4.6
16.5
4
110
79
54
17
96
44
1
.4
198
5.0
18.1
46
10
05
59
149
105
66
145
.7
16
5.5
19.8
50
150
81
74
187
11
18
4.6
71
6.9
4.7
6
00
508
98
49
174
44
4
6.
6
9.
.0
84
50
65
1
11
18
55
04
7.7
45
11.5
41.
105
00
76
147
74
61
664
65
9.
-
-
49.5
16
Projection distance changes according to the setting of SCREEN SIZE in the ADVANCED MENU in the IMAGE menu. The table above is in the
case of “16:9.”
Depending on the installation conditions, warm air that is emitted from the exhaust vents may flow into the intake
vent, causing the projector to display “TEMPERATURE!!” and then stop projecting images.
•
•
•
•
•
•
•
•
