Easy Start Guide
2. Power and Motor Connections (Three Phase)
Page 3
This guide has been produced by The Inverter Drive Supermarket Ltd.
All content, including but not limited to graphics, text and procedures copyright
The Inverter
©
Drive Supermarket and must not be reproduced or altered without prior written permission.
Notes:
The illustration above is based on the smaller
400V Three Phase frame size model (to
3.7kW). The terminal layout for larger 5.5kW
and 7.5kW frame sizes is similar.
The order of the three motor phases
determines the direction the motor turns.
The order of the three power phases is
unimportant.
Important:
Use screened cable between the Inverter and
M o t o r. To m i n i m i s e e l e c t r o m a g n e t i c
interference, ensure the cable screen is
grounded.
T h e s u p p l y m u s t m a t c h t h e I n v e r t e r
specification.
Before commencing, confirm that the Inverter and
all cables are completely isolated from the power
supply, have been isolated for at least 5 minutes
and that the motor is not turning.
Mitsubishi D700-SC Series Inverter
N/-
P/+
PR
P1
Do not remove jumper between
terminals P1 and P/+
Motor
Power
T/L3
R/L1
S/L2
U
V
W
Phase
Phase
Phase
Earth
Phase
Phase
Phase
Earth
