12
GB
How to Set the Simple Timer
1. Be sure that you are at a standard control screen, and that the simple timer indi-
cator is visible in the display (at
A
).
When something other than the Simple Timer is displayed, set it to SIMPLE
TIMER using the function selection of remote controller (see 3.[3]–3 (3)) timer
function setting.
2. Press the TIMER MENU button
b
, so that the “Set Up” appears on the screen
(at
B
). (Note that each press of the button toggles the display between “Set Up”
and “Monitor”.)
3. Press the ON/OFF button
1
to display the current ON or OFF simple timer set-
ting. Press the button once to display the time remaining to ON, and then again to
display the time remaining to OFF. (The ON/OFF indication appears at
D
).
4. With “ON” or “OFF” showing at
C
: Press the appropriate Set Time button
a
as
necessary to set the hours to ON (if “ON” is displayed) or the hours to OFF (if
“OFF” is displayed) at
D
.
• Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF setting (see step
3) and then press the CHECK (CLEAR) button
0
so that the time setting clears
to “—” at
D
. (If you want to use only an ON setting or only an OFF setting, be
sure that the setting you do not wish to use is shown as “—”.)
7. After completing steps 3 to 6 above, press the CIR.WATER button
4
to lock in
the value.
Note:
Your new settings will be cancelled if you press the Mode (Return) button
2
before
pressing the CIR.WATER button
4
.
8. Press the Mode (Return) button
2
to return to the standard control screen.
9. Press the TIMER ON/OFF button
9
to start the timer countdown. When the
timer is running, the timer value is visible on the display.
Be sure that the timer
value is visible and appropriate.
Viewing the Current Simple Timer Settings
1. Be sure that the simple timer indicator is visible on the screen (at
A
).
2. Press the TIMER MENU button
b
, so that the “Monitor” appears on the screen
(at
E
).
• If the ON or OFF simple timer is running, the current timer value will appear at
F
.
• If ON and OFF values have both been set, the two values appear alternately.
3. Press the Mode (Return) button
2
to close the monitor display and return to the
standard control screen.
To Turn Off the Simple Timer...
Press the TIMER ON/OFF button
9
so that the timer setting no longer appears on
the screen (at
G
).
To Turn On the Simple Timer...
Press the TIMER ON/OFF button
9
so that the timer setting becomes visible at
G
.
Examples
If ON and OFF times have both been set at the simple timer, operation and display
are as indicated below.
Example 1:
Start the timer, with ON time set sooner than OFF time
Example 2:
Start the timer, with OFF time is sooner than ON time
• “ON” timer:
The unit will start operation when the specified number of hours
has elapsed.
• “OFF” timer:
The unit will stop operation when the specified number of hours
has elapsed.
Timer Setting
Action (On or Off)
* “— —” is displayed if there is
no setting.
Timer Setting
ON Setting: 3 hours
OFF Setting: 7 hours
ON Setting: 5 hours
OFF Setting: 2 hours
At 3 hours
after timer
start
At 7 hours
after timer
start
At Timer
Start
Display shows the timer’s ON
setting (hours remaining to
ON).
Display changes to show the
timer’s OFF setting (hours
remaining to OFF).
The time displayed is OFF
setting (7 hours) – ON setting
(3 hours) = 4 hours.
The unit goes off, and will
remain off until someone
restarts it.
At 2 hours
after timer
start
At 5 hours
after timer
start
At Timer
Start
Display shows the timer’s
OFF setting (hours remaining
to OFF).
Display changes to show the
timer’s ON setting (hours
remaining to ON).
The time displayed is ON set-
ting (5 hours) – OFF setting (2
hours) = 3 hours.
The unit comes on, and will
continue to run until someone
turns it off.
WT07508X01.book 12 ページ ２０１５年１月２６日 月曜日 午前１１時５分
