17
8
DISASSEMBLY PROCEDURE
8-1.SERVICE PANEL and FILTER
OPERATING PROCEDURE
1. Removing the service panel (A) (Fig.1-1)
(1) Slide the service panel (A) in the direction of the
arrow
1
while lifting it. ( depending on the local
installation,the slide direction is reverse )
(2) After sliding, if it is opened in direction
2
, the ser-
vice panel (A) drops down as shown in Fig.1-2.
(3) Remove the service panel (A) from the two pins.
(Be care-ful not to allow it to drop).
2. Removing the filter (Fig.1-2)
(1) Place fingers on the projection near the PUSH
mark on the filter, as shown in Fig. A. Remove
panel frame with thumb, and press projections
with other fingers to remove the hooks.
(Fig.1-1)
(Fig.1-2)
PHOTOS&ILLUSTRATIONS
(A) service panel
Inspection
panel
Fig.A
Hooks
Press
Be careful removing heavy parts.
