background image

20

GB

Having trouble?

Here is the solution. (Unit is operating normally.)

Noise is louder than specifications.

  The indoor operation sound level is affected by the acoustics of the 

particular room as shown in the following table and will be higher than 
the noise specification, which was measured in an echo-free room.

High sound-
absorbing rooms

Normal rooms

Low sound-
absorbing rooms

Location 
examples

Broadcasting 
studio, music 

room, etc.

Reception room, 

hotel lobby, etc.

Office, hotel 

room

Noise levels

3 to 7 dB

6 to 10 dB

9 to 13 dB

Nothing appears in the wireless remote controller display, the display 
is faint, or signals are not received by the indoor unit unless the remote 
controller is close.

  The batteries are low.

  Replace the batteries and press the Reset button.

  If nothing appears even after the batteries are replaced, make sure 

that the batteries are installed in the correct directions (+, –).

The operation lamp near the receiver for the wireless remote controller 
on the indoor unit is flashing.

  The self diagnosis function has operated to protect the air conditioner.
  Do not attempt to repair this equipment by yourself.

  Turn off the power switch immediately and consult your dealer. Be 

sure to provide the dealer with the model name.

Warm air blows from the indoor unit intermittently when heat mode is off 
or during fan mode.

  When another indoor unit is operating in heat mode, the control 

valve opens and closes occasionally to maintain stability in the air 
conditioning system. This operation will stop after a while.
*  If this will cause an undesirable rise in the room temperature in 

small rooms, etc., stop the operation of the indoor unit temporarily.

Range of application

The range of working temperatures for both the indoor and outdoor units of the series Y, R2, Multi-S is as below.

 Warning:

If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a 
refrigerant leak. Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.

The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors, and 
comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.

11. Troubleshooting

Содержание city multi PLFY-P-VCM-E2























Отзывы: