Mitsubishi Electric CITY MULTI PLFY-M-VEM Series, Руководство по эксплуатации

Страница: 11 / 40

■
Confirmation procedure of the target unit
F1 F2 F3 F4
Manual vane angle
Input display:
Address Check
M-NET address
Identify unit Check button
1
Select the “M-NET address” for
the units to whose vanes are
to be fixed, with the [F2] or [F3]
button. Press the [F4] button to
confirm the unit.
3. Operation
■
Manual vane angle (Wired remote controller)
■
Vane setting
Step 1 Step 2
Step 3
No setting
Draft
reduction*
All outlets
Step 5 Step 4
Press the [SELECT] button to save the settings.
A screen will appear that indicates the setting information is being trans-
mitted.
The setting changes will be made to the selected outlet.
The screen will automatically return to the one shown above (step 5)
when the transmission is completed.
Make the settings for other outlets, following the same procedures.
If all outlets are selected, will be displayed the next time
the unit goes into operation.
Navigating through the screens
• To return to the previous screen .......... [RETURN] button
3
Select the “M-NET address” for
the units to whose vanes are
to be fixed, with the [F2] or [F3]
button, and press the [SELECT]
button.
Press the [F4] button to confirm
the unit.
The vane of only the target indoor
unit is pointing downward.
5
The current vane setting will
appear.
Select the desired outlets from
1 through 4 with the [F1] or [F2]
button.
• Outlet: “1”, “2”, “3”, “4” and “1, 2,
3, 4, (all outlets)”
Press the [F3] or [F4] button to
go through the option in the order
of “No setting (reset)”, “Step 1”,
“Step 2”, “Step 3”, “Step 4”, “Step
5” and “Draft reduction*”.
Select the desired setting.
* Draft reduction
The airflow direction for this
setting is more horizontal than
the airflow direction for the “Step
1” setting in order to reduce a
drafty feeling. The draft reduction
can be set for only 1 vane.
1
Select “Comfort” from the
Operation menu, and press the
[SELECT] button.
2
Select “Manual vane angle” with
the [F1] or [F2] button, and press
the [SELECT] button.
F1 F2 F3 F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
Setting display:
Cursor
Comfort
Manual vane angle
3D i-See sensor
Note:
Do not set the draft reduction in an environment with high humidity.
Otherwise, condensation may form and drip.
F1 F2 F3 F4
Manual vane angle
Input display:
Cur. Address Check
M-NET address
Identify unit Check button
Manual vane angle
Manual vane angle
F1 F2 F3 F4
Select:
Setting
Outlet Angle
Manual vane angle
Cur. Angle
M-NET address
Vane 4-way /2-way
Cursor
F1 F2 F3 F4
Input display:Angle button
4
Select “Vane” with the [F1]
button.
Select “4-way” or “2-way” with the
[F2] or [F3] button, and press the
[F4] button.
9
en
RG79F455H01_en.indd 9 2019/07/15 9:13:13
011