3. Operation
<Vane setting>
Press the [F1] or [F2] button to go
through the vane setting options:
“Auto”, “Step 1”, “Step 2”, “Step 3”,
“Step 4”, “Step 5” and “Swing”.
Select the desired setting.
Auto
Auto
Swing
Step 1
Step 2
Step 4
Step 3
Swing
Step 5
Select “Swing” to move the vanes
up and down automatically.
When set to “Step 1” through “Step
5”, the vane will be fixed at the se
-
lected angle.
•
under the vane setting icon
This icon will appear when the
vane is set to “Step 5” and the
fan operates at low speed during
cooling or dry operation (depends
on the model).
The icon will go off in an hour, and
the vane setting will automatically
change.
Outlet No. 2
Outlet No. 3
Outlet No. 1
Outlet No. 4
Remote controller setting
The airflow direction of this
outlet is controlled by the airflow
direction setting of remote
controller.
Fixed
The airflow direction of this outlet is fixed
in particular direction.
* When it is cold because of direct
airflow, the airflow direction can be
fixed horizontally to avoid direct airflow.
Horizontal airflow
Note:
The outlet No. is indicated by the number of grooves on both
ends of each air outlet. Set the air direction while checking the
information shown on the remote controller display.
Air outlet identification marks
<How to set the fixed up/down air direction>
Note:
●
This function cannot be set depending on the outdoor unit to be
connected.
•
For PLFY-VEM series, only the particular outlet can be fixed to certain
direction with the procedures below. Once fixed, only the set outlet is
fixed every time air conditioner is turned on. (Other outlets follow UP/
DOWN air direction setting of remote controller.)
Note:
●
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
●
Available directions depend on the type of unit connected.
●
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in “STAND BY” or “DEFROST” states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem-
perature setting.
<Vent. setting>
<Returning to the Main menu>
Press the [F3] button to go through
the ventilation setting options in the
order of “Off”, “Low”, and “High”.
* Settable only when LOSSNAY unit
is connected.
Off
Low
High
Off
Low
High
• The fan on some models of indoor
units may be interlocked with cer-
tain models of ventilation units.
Press the [RETURN] button to go
back to the Main menu.
Fri
Swing
Off
Vent.
Vane
F1
F2
F3
F4
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
28.5
Fri
Low
Vent.
F1
F2
F3
F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1
F2
F3
F4
8
en
RG79F455H01_en.indd 8
2019/07/15 9:13:13
010
