6
GB
°
F
°
C
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
°
F
°
C
°
C
TIME SUN
Function Selection of remote controller
Set Day/Time
Standard Control Screens
OFF
ON
Timer Monitor
Timer Setup
Day of the Week &
Time display
°
C
°
C
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
Time Setting
TIME SUN
Day of the Week Setting
4. Setting the Day of the Week and Time
5.1. Turning ON/OFF
<To Start Operation>
Press the ON/OFF button .
• The ON lamp and the display area come on.
Note:
When the unit is restarted, initial settings are as follows.
Remote Controller settings
Mode
Last operation mode
Temperature setting
Last set temperature
Fan speed
Last set fan speed
Airflow up/down
Mode
COOL or DRY
Horiz. outlet *1
HEAT
Last setting *2
FAN
Horiz. outlet *1
*1 Last setting might be applied depending on the type of the indoor unit.
*2 In case of the last setting is swing, airflow might be Downward 4 de-
pending on the type of the indoor unit.
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
Function Selection of remote controller:
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
Set Day/Time:
Set the current day of the week or time.
Standard Control Screens:
View and set the air conditioning system’s op-
erating status.
Timer Monitor:
View the currently set timer (weekly timer, sim-
ple timer or Auto Off timer).
Timer Setup:
Set the operation of any of the timers (weekly
timer, simple timer or Auto Off timer).
<How to change the screen>
A
: Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B
: Press the Timer Menu button.
C
: Press the Mode (Return) button.
D
: Press either of the Set Time buttons ( or ).
3. Screen Configuration
5. Operation
Note:
The day and time will not appear if clock use has been disabled at
Function Selection of remote controller.
1. Press the or Set Time button
1
to show display
2
.
2. Press the Timer On/Off (Set Day) button to set the day.
* Each press advances the day shown at
3
:
Sun Mon ... Fri Sat.
3. Press the appropriate Set Time button
1
as necessary to set the time.
* As you hold the button down, the time (at
4
) will increment first in
one-minute intervals, then in ten-minute intervals, and then in one-
hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button
4
to lock in the values.
1
2
6
7
5
3
2
5
6
7
3
A
D
C
B
C
B
<To Stop Operation>
Press the ON/OFF button
1
again.
• The ON lamp
1
and the display area go dark.
Note:
Even if you press the ON/OFF button immediately after shutting
down the operation is progress, the air conditioner will not start
for about three minutes. This is to prevent the internal components
from being damaged.
