Mitsubishi Electric 742 Series, Основное руководство пользователя

Страница: 24 / 44

24
3. TV Features
For assistance call 1(800) 332-2119
3D Video, continued
• headache, or eyestrain,
• blurry vision,
• double vision that lasts longer than a few seconds,
Do not engage in any potentially hazardous activity (for
example, driving a vehicle) until your symptoms have com-
pletely gone away. If symptoms persist, discontinue use and
do not resume 3D viewing without discussing your symptoms
with a physician.
Do not use the glasses where loss of balance or limiting your
field of vision may be dangerous to you.
Do not use near staircases, ledges or balconies. You may
risk falling during or after use.
Epilepsy
WARNING! IF YOU OR ANY MEMBER OF YOUR FAMILY
HAS A HISTORY OF EPILEPSY, CONSULT A PHYSICIAN
BEFORE USING 3D VIDEO OR GAME PRODUCTS.
A small percentage of the population may experience epilep-
tic seizures when viewing certain types of TV images or video
games that contain flashing patterns of light.
The following people should consult a physician before
viewing 3D Games or Video:
• Anyone with a history of epilepsy, or who has a family
member with a history of epilepsy
• Anyone who has ever experienced epileptic seizures or
sensory disturbances triggered by flashing light effects.
WARNING! SOME LIGHT PATTERNS MAY INDUCE
SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF
EPILEPSY. DISCONTINUE 3D VIEWING IF YOU EXPERI-
ENCE ANY OF THE FOLLOWING SYMPTOMS:
• Involuntary movements, eye or muscle twitching
• Muscle cramps
• Nausea, dizziness, or queasiness
• Convulsions
• Disorientation, confusion, or loss of awareness of your
surroundings
Notice Concerning Format Compatibility
The Mitsubishi TVs will support the mandatory HDMI
1.4a 3D signals intended for the United States. Spe-
cifically, the TVs will support the 3D signals known as
Frame Packing 1080p@24 Hz and 720p@60 Hz (primar-
ily from Blu-ray players and gaming consoles), Side-
by-Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and
720p@60 Hz, Top-and-Bottom 1080p@24/30/60 Hz
and 720p@60 Hz, and Checkerboard 1080p@60 Hz.
However, there may be some 3D sources that are not
compatible with the TVs. In all cases: (1) 3D sources
must connect to the TVs using the HDMI inputs or via
StreamTV™ Internet Media; and (2) Active Shutter 3D
glasses that match the TV’s internal synchronization
emitter, or Active Shutter 3D glasses with their own
external matching synchronization emitter connected to
the rear of the TV or DLP Link Active Shutter 3D glasses
are required in order to view 3D content.
Wireless Audio Playback (842 Series)
The TV’s built-in speaker array can play audio from a
handheld device using
Bluetooth® A2DP (stereo audio)
wireless technology.
Pairing the TV with an Audio Playback
Device
1.
Turn on the wireless device you wish to use for
playback.
2.
Press
INPUT
to display the
Input Selection
menu.
3.
Highlight the
Bluetooth
icon and press
ENTER
.
4.
Pair your device with the TV and then connect. Some
devices pair and connect automatically, while others
require you to enter the TV pass code displayed.
5.
Use keys on the TV’s remote control to control play-
back. Not all keys work for all devices.
Resetting Bluetooth Pairing or Connection
Perform this reset if the audio device does not connect
properly to the TV.
1.
If the audio device has been previously paired with
the TV, delete the TV from the device’s paired list.
2.
Go to the TV’s
Inputs > Name
menu and highlight
the
Bluetooth
icon. Press
ENTER
to select
Off
.
3.
Press EXIT .
4.
Go to the
Inputs > Name
menu and highlight the
Bluetooth icon. Press ENTER to select On .
5.
Press
EXIT
.
Tips for Wireless Playback
• Selecting the
Bluetooth
icon at a later time will
connect the TV again to the paired device.
• If the paired device is not available, the TV will
accept pairing from a different device.
• Once connection is lost, the TV will power off after
five minutes without receiving a signal.
• To clear a paired device, turn off the Bluetooth icon
( Inputs > Name menu) or pair the TV with a differ-
ent device.
• To remove the
Bluetooth
icon from the
Input
Selection
menu, turn off the icon in the
Inputs >
Name
menu.