Mitsubishi Daiya SRK20HB, Руководство пользователя

Страница: 12 / 20

– 11 –
1
2
OFF-TIMER operation procedure
■
The unit stops automatically at the end of the set period of time.
The room temperature is automatically controlled when the set time lapses, so that the room does not become too cold during cooling or too warm during
heating.
Page 12
CONT
ON OFF TIMER
FAN SPEED ON/OFF MODE
TEMP AIR FLOW
SET TIMER TIMER
ACL
AUTO
HI
MED
LO
ON-TIMER operation procedure
■
If the room temperature is at near optimum temperature at the set time, the operation starts 5 to 60 minutes before the set time. Page 12
NOTE
CONT
ON OFF TIMER
FAN SPEED ON/OFF MODE
TEMP AIR FLOW
SET TIMER TIMER
ACL
AUTO
HI
MED
LO
1
2
3
Example: In the case you wish to bring the temperature to nearly set temperature in 8 hours.
Press the ON/OFF button.
Press the TIMER button.
Each time the button is pressed, the indicatior is switched in the order of:
Set at .
Press the TIMER TIME button.
Each time the button is pressed, the indicator is switched in the order of:
12
→
11
→
10 ............ 2
→
1.
Each time the button is pressed, the indicator is switched in the order of:
1
→
2
→
3 ............ 11
→
12.
Set at 8.
The timer light (yellow) is on.
⇓
• Operation starts 5 to 60 minutes before the set time.
• The TIMER light goes out at the set time.
Releasing procedure
Press the TIMER button to turn off the timer indicator.
Changing of set time
Set a new time by using the TIMER TIME button.
3
No indication
Example: You wish it to stop after 7 hours.
If the air conditioner is not operating, aim the remote control at the air conditioner.
Press the ON/OFF button.
Press the TIMER button.
Each time the button is pressed, the indicatior is switched in the order of:
Set at .
Press the TIMER TIME button.
Each time the button is pressed, the indicator is switched in the order of:
12
→
11
→
10 ............ 2
→
1.
Each time the button is pressed, the indicator is switched in the order of:
1
→
2
→
3 ............ 11
→
12.
Set at 7.
The timer light (yellow) is on.
⇓
•
The unit stops at the end of the set period of time.
Depending on the temperature, the operation may be stopped earlier than the
set time.
Releasing procedure
Press the TIMER button to turn off the timer indicator.
No indication
Changing of set time
Set a new time by using the TIMER TIME button.
P.1-18/E 04.10.19, 10:27 AM 11