MITS Eleven Auto FPZ-31AT, Руководство по управлению, Страница: 61 / 108

60
Size of Board Material
It is necessary to prepare the board material which has enough size to mill. It is easier to
understand what the enough size is by putting the board material temporarily on the machine
table and move the spindle head from P1 to P2.
●
Range where Pressure Foot Moves:
It requires 15 - 50mm margin for pressure foot. Please note that it will vary depending
on the model of Pressure Foot.
●
Margin for Securing Tape:
It requires approx. 5mm margin for securing tape.
●
Space for Stuck Pins:
It requires 3 mm holes for stuck pin to the underlay and the board material. The
stuck pins should stand outside the range of the pressure foot.
Put board on table and secure it with tape.