MITS Eleven Auto FPZ-31AT, Руководство по управлению, Страница: 28 / 108

27
Air Regulator Connection
Prepare air compressor and air hose diam.
6mm.
(outer diameter 6mm)
Connect to the inlet of air regulator on the back
of prototyping machine.
Connect the attached drain hose to the
drain port.
Other end of hose should be inserted into
a bottle.
Water removed by filter will be drawn into the
bottle.
Turn on the air compressor. Open the valve of
air regulator. Pressure from air compressor
should be lowered by the regulator to stabilize
the air supply.
Model
Regulator
Indicator
(Mpa)
Auto tool changing 0.55-0.6
Auto tool changing &
Non-contact foot(HP)
0.55-0.6
Non-contact foot (HP) 0.4-0.45
The air regulator is not large and filter ability is restricted. Another filter on
the air compressor side is necessary.
Make sure to remove the water in the drain tank of the air compressor
occasionally. Otherwise, water might flow into the machine and spindle motor.