mitrefinch 20000001, Руководство пользователя

Страница: 8 / 16

7
Wall mounting bracket
The T2 comes with a strong steel wall mounting bracket.
The rear bracket plate should be screwed to the wall with a recommended minimum
of M3.5 x 40mm screw and rawl plug. In the case of an IP66 installation please see
guidelines in the IP66 Section.
Cables can be fed through the circular hole ready for the T2.
Once all the cables have been inserted, the T2 backplate can then be screwed to the T2,
the set screws screwed into the holes in the bottom of the T2, and the T2 hooked onto
the wall bracket.
The T2 is secured in place by two nylon locking nuts fitted to the set screws.
Cable entry
Cables can enter the T2 from the rear or from below.