mitrefinch 20000001, Руководство пользователя

Страница: 11 / 16

10
Connectivity
On the back of the T2 is an illustrative sticker detailing the connections on the unit. The
following diagram outlines the purpose and function of these connections.
Relay jumpers
(Not currently
supported) Carefully
relocate the jumper
across the top two or
bottom two pins to
switch between 12V
or Gnd
Relays
(Not currently
supported) You can
connect up to two
relay switchable
devices
Ethernet
Standard RJ45
ethernet jack.
Port supports 25W
Power over Ethernet
Digital In/Out
(Not currently supported)
Standard digital i/o for connecting
to low current access control
hardware
Readers
(Not currently supported) Standard
clock and data reader port for
connection to a 3rd party reader
T-Link
(Not currently supported) For
connecting to a Mitrefinch T4
Reader or T1 Blade only
SIM card
(Not currently
supported) Insert
your microsim here
DC power
Power your T2 with an
approved Mitrefinch
DC Adapter
Battery on/off
If the unit is
unplugged, then
turning the battery
to off will switch the
unit off
Antennae
(Not currently supported) An external antenna can
be attached here with an MCX terminal