Mitox 26B, Руководство оператора

Страница: 21 / 32

26B Blower / 28BV Blower Vacuum
21
Original Instructions Version October 13
Spark Arrestor Maintenance
Hard starting or gradual loss of performance can be caused by carbon deposits lodged in the spark arrestor
screen. For maximum performance, the spark arrestor screen should be periodically cleaned as follows:
1. Remove the spark plug.
2. Remove three self- tapping screws and two machine screws from the engine cover, and then
gently move the engine cover aside.
3. Remove the three-spark arrestor retaining screws, and then remove the spark arrestor cover,
screen, gasket, and chamber.
4. Use a plastic scraper or wire brush to remove carbon deposits from the arrestor screen, chamber,
and cover.
5. Inspect the screen carefully, and replace any screen that has been perforated, distorted, or is
otherwise unserviceable.
6. Install the chamber, screen, gasket and cover in the reverse order of disassembly, and then install
and securely tighten the three cover retaining screws.
7. Install the engine cover, and verify that the fuel line connections are still tightly in place.
8. Install the engine cover retaining screws in the reverse order of removal, and tighten securely.
9. Install and tighten the spark plug, and reconnect the spark plug wire.