Mitox 26B, Руководство оператора

Страница: 16 / 32

26B Blower / 28BV Blower Vacuum
16
Original Instructions Version October 13
Adjusting the Engine Idle Speed
1. Start the engine by following the
procedures described on the preceding
pages.
2. Run the engine at idle speed until
operating temperature is reached (2-3
minutes).
3. Use a screwdriver to adjust the engine
idle speed to 2300-2500r/min.
Turn the idle screw clockwise to increase engine
idle speed.
Turn the idle screw counterclockwise to decrease
engine idle speed.
IMPORTANT !
Machine tubes and intake cover must be installed while adjusting engine idle! Engine idle speed will also be
affected if either the intake cover or machine tubes are blocked, damaged or incorrectly installed!
IMPORTANT !
If the engine continues to run with the ignition switch in the “OFF” position, stop the engine by pulling the
choke control out to the fully closed position.
A clean and unrestricted airflow is essential to your machine’s engine performance and durability! Before
attempting any carburetor adjustments, inspect and clean the engine air cleaner as described on page 11 of
this manual.