Mitox 266LRH, Руководство оператора, Страница: 8 / 28

266LRH / 268LRH Hedgetrimmer
8
Original Instructions Version June13
Before Operating the Hedge Trimmer
Before beginning work, carefully check the work area and remove any obstacles.
Within a perimeter of 15 metres of the work area should be considered a hazardous area into which no-one
should enter while the hedge trimmer is being used, and when necessary this area should be marked with a
warning rope, warning signs, or other forms of warning.
When work is to be performed simultaneously by two or more operators, care should also be taken to
constantly look around to check the presence and locations of other operators within the work area to
maintain a safe distance between each operator.
Before beginning work, each component of the hedge trimmer should be checked to make sure that it is
in proper working order, make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents, or any
other problems which might interfere with safe operation. Be especially careful to check that there is no
damage to the blades.
Keep all parts of your body away from the hedge trimmer blades when the engine is running.
Before Starting the Engine
Carefully check the work area to make sure that no obstacles exist within a perimeter of 15 metres around
the hedge trimmer before starting the engine.
To start the engine, place the hedge trimmer onto the ground in a flat clear area and hold it firmly in place to
ensure that neither the blades or the throttle come into contact with any obstacles when the engine starts.
After starting the engine, make sure that the blades stop moving when the throttle trigger is released (idle).
If the blades continue to move when the engine is at idle, adjust the idle screw on the carburettor to a
point where the blades stop moving, if this cannot be achieved, take the hedge trimmer to your authorised
servicing dealer for adjustment.