Mitox 266LRH, Руководство оператора, Страница: 18 / 28

266LRH / 268LRH Hedgetrimmer
18
Original Instructions Version June13
Storage
• Remove the spark plug, pour a small amount of oil into the cylinder. Rotate the crankshaft several
times using the starting rope in order to distribute the oil. Put the spark plug back in.
• Remove the fuel from the machine.
• Check the hedge trimmer for damage or problems at the intervals shown below.
Blades
• Remove the fuel from the machine.
• After each session of operation, oil the cutting blades with light chain oil.
• If gap exists between upper and lower blades, adjust them so they are closer together, this is
achieved by loosening the top lock nut, screw the blade bolt in until a snug fit and then loosen
blade bolt ½ turn.
• Hold the blade bolt from turning and tighten the lock nut.
• If you feel that you will not be able to adjust the blades correctly, you should take the
hedge trimmer to an authorised repair agent.
Gearbox Lubricant
• Always be sure to use lithium based grease.
• DO NOT force grease into the gear box, apply 2 or 3 pumps of grease every 15 hours of operation.
Grease Fittings