7
ASSEMBLY OF THE GRASS TRIMMER
The blade fitted to the guard is sharp and can cause injury, always wear gloves
INSTALLATION OF THE GUARD
•
To install the guard to the shaft, locate the shield using bracket A as a locating point Fig 2, and secure
using plate B and 2 screws Fig 4.
The blade fitted to the guard is sharp and can cause injury, always wear gloves
INSTALLATION OF THE NYLON HEAD
•
Hold the dust cover Fig 5 with a wrench Fig 6 to stop the shaft rotating and screw the trimmer head
clockwise onto the drive shaft until tight.
Fig 5
DRIVE SHAFT, DUST COVER
Fig 6
WRENCH
Fig 2
Fig 4
PLATE B
Fig 1 BRACKET A
Fig 2
BRACKET A
SHIELD
Fig 3
