13
Fig 17 T screw
•
If the idle speed cannot be adjusted to stop the cutting head moving at idle,
contact your dealer for repair before use.
Fig 18 SAFETY LOCK,
THROTTLE LEVER
SAFETY LOCK
•
The safety lock is to prevent the throttle lever from accidentally being engaged.
•
The throttle lever, Fig 18, can only be pressed in if the safety lock is held down.
•
Check if the safety lock and throttle lever returns to its original position and the engine returns to idling
when you release your hand from the handle.
•
Any defects contact your nearest service agent for repairs before using the machine.
STORAGE
•
Remove the spark plug, pour a small amount of oil into the cylinder. Rotate the crankshaft several
times using the starting rope in order to distribute the oil. Put the spark plug back in.
•
Remove the fuel from the machine.
TROUBLESHOOTING
Engine will not start, power loss.
•
Check that the fuel tank is not empty. Fill with mixed fuel.
•
The fuel does not reach the carburettor. Change the fuel filter in the fuel tank.
•
There is water in the fuel. Drain and clean the fuel system.
•
The air filter is dirty. Clean or replace the air filter.
•
There are carbon deposits in the exhaust muffler restricting the engine. Clean or change the
muffler.
•
Spark plug is worn. Replace spark plug.
