6/34
ENGLISH
ASSEMBLY SEQUENCE
1. Take the structure out of the case and arrnage it on a level ground. Hold the legs
and stretch.
2. Put the roof on. Velcro together roof and frame corners.
ATTENTION! For Mitkotent Premium in sizes 4 × 4 m, 5 × 5 m, 6 × 6 m pull out
the mast and block it.
3. Holding the lower sabres, stretch the structure.
4. Fasten the locks in corner legs. Remember to lock the blocks on center legs. For
better stability put your foot on the basis of the leg of the tent.
5. Fasten the roof with clip buckles.
6. Press the lock located on the leg, slide out the inner leg and lift the tent.
ATTENTION! Assemblers should lift the same side of the tent.
7. Unblock and slide out the leg on the opposite side. Depending on the tent
dimensions and number of legs, please unblock and slide out the legs according
to the assembly sequence. For Mitkotents Premium in size 6 × 6 m insert
additional leg, this is included in the accessories, in the hole of the middle mast.
8. Velcro the wall to the valance of the roof. Fasten wall side Velcro’s around the
legs.
9. Connect the walls with a velcro/zip (depending on version).
10. On the ground, secure legs of a tent with 26,5 cm long anchors. Connect one
side of the guy rope, with the tent roof and anchor the other end with 34 cm
twisted steel tent peg. Then stretch the guy rope at an angle of 45 degrees and
anchor it. When on concrete surface, secure the tent with ballast or sleeve
anchor.
Size
of tent
Type
of tent:
P – Premium
OP – Octa
Pro
Wind
speed
[km/h]
Anchor
Concrete
substrate
Ground substrate
Weight to
mount
each foot **
Steel anchor,
length
26,5 cm,
fi 10 mm *
Twisted
steel anchor,
length 34 cm
for each stay
45° *
3 × 3 m
P, OP
< 50
corner
2
×
16 kg
2 ×
1 ×
3 × 4,5 m
P, OP
< 50
corner
2
×
16 kg
2 ×
1 ×
3 × 6 m
P, OP
< 50
corner
2
×
16 kg
2 ×
1 ×
P, OP
< 50
median
2
×
27,5 kg
3 ×
1 ×
4 × 4 m
OP
< 50
corner
2
×
16 kg
2 ×
1 ×
4 × 6 m
OP
< 50
corner
2
×
16 kg
2 ×
1 ×
4 × 8 m
OP
< 50
corner
2
×
16 kg
2 ×
1 ×
OP
< 50
median
2
×
27,5 kg
3 ×
1 ×
Table 2. Ways to anchor of canopies
Содержание MITKOTENT CLASSIC
