background image

Page iv

Mitel

®

 5304 IP Phone User Guide – Issue 2, June 2010

IP Phone Usage

This equipment is not for connection to the telephone network or public coin phone service. It is only for use when 
connected to Mitel systems.

WARNING

When using your phone equipment, basic safety precautions should always be followed to reduce the risk of 
fire, electric shock and injury to persons, including the following:

 •

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry 
tub, in a wet basement, or near a swimming pool.

 •

Avoid using an IP phone (other than a cordless type) during an electrical storm. There may be a remote 
risk of electric shock from lightning.

 •

Do not use the IP phone to report a gas leak in the vicinity of a leak.

 •

Do not connect directly to the Public Switched Telephone Network (PSTN). Any connection of this IP 
phone to an off premise application, an out of plant application, any other exposed plant application, or 
to any equipment other than the intended application may result in a safety hazard, and/or defective 
operation, and/or equipment damage. “Exposed plant” means where any portion of the circuit is subject 
to accidental contact with electric lighting or power conductors operating at a voltage exceeding 300 
volts between conductors or is subject to lightning strikes.

 •

The socket outlet, if used, shall be located near the equipment and shall be easily located by the user. 

 •

Use only Mitel approved power adaptors.See “Power Requirements” on 

page iii

 •

The handset supplied with the IP phone is not certified for use with any other phone. Use of the 
handset with any other phone may have the potential to cause hearing loss in the event of a lighting 
strike on the outside plant wiring. 

Содержание OfficeConnect 5304





















































































Отзывы: