Mitel MX-ONE страница 21 Скачать руководство пользователя

Страница: 21 / 25

EDERAL

OMMUNICATIONS

OMMISSION

(FCC) D

ISCLAIMER

HAPTER

OMPLIANCE

Federal Communications Commission (FCC) Disclaimer

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Important

Any modifications made to this device that are not approved by Mitel Corporation may void the authority

granted to the user by the FCC to operate this equipment.

Innovation, Science and Economic Development Canada

(ISED) Disclaimer

This Class A digital apparatus complies with Canadian ICES-003.

CE Marking

CE Marking

Declaration of Conformity

We, Mitel Networks

Corporation (MITEL®), located at 350 Legget Dr. Kanata, ON K2K 2W7 Canada,

declare that for the hereinafter mentioned product the presumption of conformity with the applicable

essential requirements of Directives 2014/30/EC and 2014/35/EC European parliament (EMC and LVD

directives) is given. Any unauthorized modification of the product voids this declaration. For a copy of the

original signed Declaration Of Conformity please contact Mitel at the above address.

RoHS Declaration of Compliance

This controller is in compliance with the Council Directives 2011/65/EC on the restriction of the use of

certain hazardous substances in electrical and electronic equipment.

Содержание MX-ONE


























Результаты поиска

Содержание MX-ONE

Отзывы:

Похожие инструкции для MX-ONE

Бренды по названию

Популярные бренды

Mitel MX-ONE, Руководство по установке

Результаты поиска

Содержание MX-ONE

Отзывы:

Похожие инструкции для MX-ONE

Бренды по названию

Популярные бренды