Mitel 6869i, Руководство по установке

Страница: 12 / 24

Mitel 6869i SIP Phone Installation Guide
7
INSTALLATION AND SETUP
The 6869i SIP Phone can be set up to share a network connection with another network device.
Power can be provided by the power adapter (sold separately), by an 802.3af compliant network
power source, or with a PoE inline power injector.
DIRECT OR SHARED NETWORK CONNECTION
The phone can be set up as a direct network connection to the Ethernet wall jack or as a shared
network connection as a pass-through if connecting the phone to a computer or another network
device.
DIRECT NETWORK CONNECTION
Located on the back of the phone are two fully switched 10/100/1000 Mbps Ethernet cable
ports. The port marked with
is used to connect the phone to the network, as well as provide
power to your phone (if required). See “Connecting to the Network and to Power” on page 8
for more information.
Notes:
1. This product is designed for indoor use only and for ambient temperatures at or
below 40° C (104° F).
2. The phone must be connected only to indoor routed PoE or Ethernet wiring.
To Other
Network Device
To Network
Power Adapter
Connection
Power Adapter
Ethernet Cables
Network Jack
(if inline power provided,
do not install the power adapter)
Other Network Devices