Mitel 6867i Premium, Руководство администратора

Страница: 556 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-295
If the Administrator enables this feature (by specifying a disconnect URI), when a call is
disconnected, the phone checks to see if the event has a Disconnect URI configured. If the
phones finds a configured URI with a $$LINESTATE$$ variable, it replaces the $$LINESTATE$$
variable with the appropriate line state of the current active line. After all of the variables are
bound, the phone executes a GET on the URI. The following table lists the applicable values
for the $$LINESTATE$$ variable.
The Action URI Disconnect feature allows an Administrator to determine the reason for the
disconnect if required.
Example
If you enter the following string on Phone A for the “
action uri disconnected”
parameter:
action uri disconnected:
http://fargo.ana.mitel.com/disconnected.xml?state=$$LINESTATE$$
and then Phone A calls Phone B, Phone B answers and then hangs up, Phone A executes a
GET on:
http://fargo.ana.mitel.com/disconnected.xml?state=CONNECTED
which is what the remote server receives.
An Administrator can enable the disconnect feature using the configuration files or the Mitel
Web UI.
$$LINESTATE$$
VALUE DESCRIPTION MEANING IN A
DISCONNECTED URI
IDLE Phone is idle. N/A
DIALING Phone is offhook and ready to dial. N/A
CALLING A SIP INVITE was sent but no
response was received. Error occurred during the call or
the call was cancelled.
OUTGOING Remote party is ringing. Call was cancelled.
INCOMING Local phone is ringing. Call was missed or cancelled.
CONNECTED Parties are talking. Call was successful.
CLEARING Call was released but not
acknowledged. N/A
Note:
If you enable the Action URI Disconnect feature by specifying a URI, the URI is
called when any disconnect event occurs including an intercom call or a conference
setup.