Mitel 6867i Premium, Руководство администратора

Страница: 384 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-123
5.
Select a value from the "
LineN
" field
.
6.
Click
Save Settings
to save your changes.
CUSTOM RING TONES
The 6800 series IP phones support up to eight custom ring tones. Administrators (and if enabled,
users) can install ring tones on the phone using the configuration files or the Web UI. Users
can then simply select a ring tone on the phone or the Web UI to use as their incoming call ring
tone.
Administrators can install local WAV files using the phone’s Web UI under the
Basic Settings
> Custom Ringtones
menu or install WAV files located on an FTP, TFTP, HTTP, or HTTPS
server by defining their location and filename in the respective configuration file using the
“
custom ringtone N
” parameter (where N = 1 to 8). For example, if the following parameters
are added to the startup.cfg, <model>.cfg, or <mac>.cfg,
custom ringtone 1: ftp://192.168.0.50/beep.wav
custom ringtone 2: ftp://192.168.0.50/classic.wav
the phone will download both WAV files from the FTP server and store beep.wav in position 1
and classic.wav in position 2 on the phone.
Note:
See the
“Ring Tone Settings Table”
on
page 5-112
for valid values.
Notes:
1.
Ring tones must be in .wav format. The IP phones support the following WAV file
specifications:
• G.711 μ -law and a-law Codec
• 20 ms packet size
• Mono 8KHz
2.
Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight
WAV files cannot exceed 8 MB).
3.
Filenames must contain only ASCII characters.
4.
For information on how to set a custom ring tone, see
“Ring Tone Settings Table”
on
page 5-112
.
Notes:
1.
If the filename of a WAV file defined using the “
custom ringtone N
” parameter
matches the filename of an already installed ring tone, the phone will compare
hashes and only install if the hashes differ.
2.
Ring tones can be deleted from the phone by removing the respective “
custom
ringtone N
” parameter from the configuration file or by deleting through the Web UI.
3.
All custom ringtones will be deleted from the phone if a factory default is executed.