Mitel 6865i Скачать руководство пользователя страница 144

Страница: 144 / 203

Mitel 6865i SIP Phone Release 4.1.0 User Guide

142

DND in Custom Mode

Press the

DND

key on the phone. The screen displays a list of the accounts on the phone

and allows you to enable/disable a specific account or all accounts.

Use the

and

navigation keys to scroll through the accounts.

In the above example, account 1 has DND enabled as indicated by a check mark (



Account 2 has DND disabled as indicated by an

. Items 3 and 4 allow you to disable or

enable DND on all accounts, respectively.

Use the

Change

key to enable or disable DND for a specific account or to enable/disable

DND for all accounts.
After making the change, press

Done

and then

# Confirm

to save the change. Pressing

0 Cancel

cancels the attempted change.

IP PHONE UI

DND
John Smith
Done Change

DND
J. Smith X
Done Change

DND
All Off
Done Change

DND
All On
Done Change

Apply Changes
0Cancel
#Confirm

Содержание 6865i












































































































































































































Результаты поиска

Содержание 6865i

Отзывы:

Mitel 6865i, Руководство пользователя, Страница: 144 / 203

Результаты поиска

Содержание 6865i

Отзывы: