background image

User Guide

- 22 -

To pick up a call to a pre-programmed extension:

1. When 

the 

DSS/BLF key is flashing with ringing cadence, lift the handset.

2.  Press the programmable key assigned to the DSS/BLF feature.

To retrieve a call that has been held by a pre-programmed extension:

1. When 

the 

DSS/BLF key is flashing with held cadence, lift the handset.

2.  Press the programmable key assigned to the DSS/BLF feature.

Extension Group

An EXTENSION GROUP key allows you to call an extension group with a single key. Membership of
an extension group is set up by your System Administrator (and can be, for example, all members of
the Sales Department). When an extension group is called, all extensions in the group ring until the
call is answered.

Contact your System Administrator for a list of extension group numbers.

The status of an extension group is indicated by the EXTENSION GROUP key light as follows:

Key Status

Explanation

Lit

All extensions in the extension group are busy.

Unlit

At least one extension in the extension group is idle.

Flashing

Extension group is ringing.

To call an extension group:

1. Lift 

the 

handset.

2.  Press the programmable key assigned to the EXTENSION GROUP feature.

Extension Paging

EXTENSION PAGING allows you to make an announcement through an extension’s speaker. You
can program a key to page a single extension, an extension group, or all extensions effectively
turning the telephone system into an intercom.

To use EXTENSION PAGING:

1. Lift 

the 

handset.

2.  Press the programmable key assigned to the EXTENSION PAGING feature.

3.  Dial the extension number or the paging zone number (if applicable).

4.  Make the announcement.

5.  Replace the handset to complete the page.

Group Listen

During a handset call, this feature turns on your extension’s speaker to allow others nearby to listen to
your current call while your handset microphone remains on allowing you to speak to the other
person.

Содержание 5005



































Отзывы: