TOWER MAGNUS
Installation and user manual
Page 27 of 32
TX AND RX barrier LEDS ENABLED
They show the status of the green and red led on the TX and RX antennas.
To change the on / off condition, place the mouse on the led box whose status you want to change
(figure 1) and click once (figure 2).
The flag in the box indicates the led are lit.
To save the modification, click with the mouse on the red cell of the address you are configuring
(figure 4).
RX LEVEL barrier
Displays the level of the RX signal.
The values entered in this barrier cannot be changed.
INTRUDER SPEED barrier
Displays the time (in mS) of the attenuation duration of the alarm signal.
To change this parameter, place the mouse on the cell of the address you want to modify and click once
(figure 1).
Wait for the control window to open (figure 2) and enter a value between 20 and 350, then click OK
(figure 3).
To save the modification, click with the mouse on the red cell of the address you are configuring
(figure 4).
barrier ALARM OFFSET
Displays the attenuation level (in dB) of the alarm signal.
To change this parameter, place the mouse on the cell of the address you wish to modify and click once
(figure 1). Wait for the control window to open (figure 2) and enter a value between -20 and -1, then
click OK (figure 3).
To save the modification, click with the mouse on the red cell of the address you are configuring
(figure 4).
Figure 1
Figure 2
Figure 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Figure 2
Figure 4
Figure 3