MITECH MT660 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 25

MITECH MT660 Скачать руководство пользователя страница 21

mvip@mitech-ndt.com

6. Measuring Technologies

6.1 Measuring Method

Single point measuring method: Put the probe to any point in the workpiece, the instrument

will show the probe located place thickness.

Two point measuring method: Using the probe to measure two times in the same point of the

tested piece, in two measuring, the probe parting plane keep 90º, the smaller value should be the
thickness of this point.

Multi-point measurement method: Taking times testing in an approximately 30 mm diameter

circular around, the minimum value is the thickness value of the tested piece.

Continuous measurement method: using single point measurement to take continuous

measurement along the specified path with less 5mm interval, the minimum value is the thickness
value of the tested piece.

6.2 Wall Measurement

During measuring, the probe parting plane can be along with the tube axis or vertical tube

axis. If meeting larger tube diameter, you should measure at the vertical axis. And when the tube
diameter is smaller, you should measure in both directions and the minimum value is thickness
value.

7 Servicing

When the gauge appears some other abnormal phenomena, please do not dismantle or adjust
any fixedly assembled parts. Fill in and present the warranty card to us. The warranty service can
be carried on.

8 Transport and Storage



Keep it away from vibration, strong magnetic field, corrosive medium, dumpiness and dust.
Storage in ordinary temperature.



With original packing, transport is allowed on the third grade highway.

[email protected]

«
...
19
20
21
22
23
...
»

Содержание MT660


























Отзывы:

Нет отзывов