Thank You for purchasing the golf industry’s state-of-the-art STEELCLUB Irons Angle
Machine. You should find it simple to operate. Please follow the instructions in this manual.
Be sure to mount the stand into the floor and attach the machine before attempting to
use it. If you have any questions, please call 1-800-437-1314.
Your STEELCLUB Irons Angle Machine is a percision gauge.
When measuring a particular golf club in your STEELCLUB Irons Angle Machine, the
angle readings are correct. When these angle readings are compared to the published
standards for that club and are found different, then that particular club does not meet
those standards.
If you compare the loft/lie angles of a particular club measured in other machines to
a STEELCLUB Irons Angle Machine, there may be a difference. That is because some
machines do not adjust for offset, progressive offset, non-offset, or face progression hosel
positions and therefore give inaccurate and inconsistent readings. You can measure any
club in a STEELCLUB Irons Angle Machine accurately.
All products manufactured by Mitchell Golf are guaranteed against defects and
workmanship. Replacement or repair will be at the discretion of Mitchell Golf.
