![Mitchell & Johnson WLD+211T Скачать руководство пользователя страница 36](http://html.mh-extra.com/html/mitchell-and-johnson/wld-211t/wld-211t_user-manual_1806923036.webp)
Page | 42 ©
Mitchell & Johnson UK 2015 WLD+211 IB Ver 1.0 Rev 0.0
16.
Troubleshooting and error messages
The WLD+211 is equipped with state-of-the-art technology and is safe to operate. Nevertheless, problems or malfunctions
may occur. Before contacting Mitchell & Johnson customer support, refer to the following for possible solutions.
PROBLEM
POSSIBLE SOLUTION
No power when switched on
-
Mains socket not switched on or faulty
-
Plug not fully inserted into wall socket
-
Internal mains fuse has blown inside the unit,
this will need to be replaced by a qualified service
technician
-
Power cord has become damaged, this should be
replaced immediately by a qualified technician
No sound
-
Power not turned on
-
Volume setting low
-
Loudspeaker cables not connected
-
No input audio equipment is connected or is faulty
-
Correct audio input source not selected on front panel
No sound in one channel
-
Audio source input cables connected incorrectly or
damaged
-
Audio input source faulty
Loudspeaker cables connected incorrectly or
damaged
-
Loudspeakers are faulty
Loud buzz or hum
-
Audio input cables damaged or not correctly
connected
-
Turntable earth lead incorrectly fitted
-
Turntable head shell incorrectly fitted.
-
CD player sited too close to TV
Weak bass, diffused stereo image
-
Speaker connections out of phase check + and –
terminals are connected to corresponding terminals on
both amplifier and loudspeakers
Distorted sound
-
Frayed wires may be touching on speaker terminals
causing distortion
-
Bass and treble controls may be too high for
loudspeaker specification.
-
Volume control may be set too high
Audio input source switches not
working
-
Internal fault would need servicing by a qualified service
technician.
Remote control not working
-
Check if the batteries have been inserted correctly.
-
If batteries are empty, replace them with new ones.
-
Point the remote control at the remote sensor and press
to operate.
-
Remove any objects found between the remote control
and the remote sensor.
-
Make sure the distance between the remote control and
the device does not exceed 8 m
Interference during reception
-
The reception frequency has not been set properly.
-
The antenna has not been positioned properly.
-
Start a station search.
Содержание WLD+211T
Страница 1: ...WLD 211T Lossless Network Audio Player with internet DAB FM Stereo Tuner User Guide ...
Страница 15: ...Page 15 Mitchell Johnson UK 2015 WLD 211 IB Ver 1 0 Rev 0 0 Modes menus overview map ...
Страница 42: ... Mitchell Johnson UK 2015 WLD 211 IB Ver 1 0 Rev 0 0 www mitchellandjohnson com ...