MiTAC Ulmo, Быстрый старт

Страница: 13 / 23

Getting connected
Your device’s networking capabilities allow you to access the Internet through WLAN network
or 3.5G network. You can also connect to the other device to share files via Bluetooth.
WLAN
WLAN is a term used for certain types of wireless local area networks, which lets you access
the Internet through a wireless connection. To use WLAN on your device, you need access to a
wireless access point.
Turning WLAN on and connecting to WLAN
1. Access the Settings menu
Æ
Wireless & networks.
2. Tap the WLAN option to turn WLAN on. The device will automatically scan for available
wireless networks.
3. Tap the WLAN settings option to display the network names and security settings (Open
network or Secured with WEP) of the detected WLAN networks. The available wireless
networks will be listed in the WLAN networks section.
4. Tap a WLAN network to connect.
„
If you selected an open network, you will be automatically connected to the network.
„
If you selected a network that is secured with WEP, enter the key and then tap
Connect.
The next time your device connects to a previously accessed secured wireless
network, you will not be prompted to enter the WEP key again, unless you reset your
device to its factory default settings.
Note: When your device is connected to a wireless network, the WLAN icon ( ) will appear in the
Status Bar, showing the signal strength (number of bands that light up).
12