34
3. Follow the on-screen instructions. You have to decompress the drivers and
select the appropriate one according to your system specifications:
For AGP –
AGPVXD32
For mini port -
NIRQ-13
For APM -
VIAREG14
NOTE:
If you use a SCSI hard disk as a booting device, please add
rem c:\essaudio.com –blaster
to the autoexec.bat file and
rem device=c:\essaudio.sys
to the config.sys file.
Installation Instructions for Windows NT 4.0
Audio Driver
The audio driver is required for using your system’s audio capabilities. To install
the audio driver for Windows NT 4.0, follow these steps:
1.
In Windows NT, select “Control Panel”, “Multimedia”, and “Devices” tab.
2.
Click on “Add” button.
3.
Select “Unlisted or Updated Driver” and click on “OK”.
4.
Insert the CD into the CD-ROM drive.
5.
Specify the path
\5114VU\AUDIO\NT4.0
on the CD, choose the driver from
the list, and click on “OK”.
6.
Follow the on-screen instructions. Select “Use Dual DMA” or “Enable
MPU401” if you need these two features.
7.
Restart the system.
Video Driver
The video driver is required for using your system’s video capabilities. To install
the video driver for Windows NT 4.0, follow these steps:
1.
In Windows NT, select “Control Panel”, “Display”, and then “Settings”.
2.
Select “Display Type” and then “Change”.
3.
Select “Hard Disk”.
4.
Insert the CD into the CD-ROM drive.
