MIT PEY-P18JAG Скачать руководство пользователя страница 8

Страница: 8 / 36

6. Timer

<How to Set the Weekly Timer>

1. Be sure that you are at a standard control screen, and that the weekly

timer indicator is shown in the display.

2. Press the Timer Menu button

, so that the “Set Up” appears on the

screen (at ). (Note that each press of the button toggles the display
between “Set Up” and “Monitor”.)

3. Press the Timer On/Off (Set Day) button

to set the day. Each press

advances the display at to the next setting, in the following
sequence: “Sun Mon Tues Wed Thurs Fri Sat”

“Sun”

...

“Fri”

“Sat”

“Sun Mon Tues Wed Thurs Fri Sat”...

4. Press the

Operation button (

) as necessary to select

the appropriate operation number (1 to 8) .
* Your inputs at Steps 3 and 4 will select one of the cells from the

matrix illustrated below.
(The remote-controller display shows how the display would appear
when setting Operation 1 for Sunday to the values indicated below.)

Setup Matrix

Note:
By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the same
operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)

<Setting the Weekly Timer>

5. Press the appropriate Set Time button

as necessary to set the

desired time (at ).
* As you hold the button down, the time first increments in minute

intervals, then in ten-minute intervals, and then in one-hour intervals.

6. Press the ON/OFF button

to select the desired operation (ON or

OFF), at .
* Each press changes the next setting, in the following sequence: No

display (no setting)

“ON”

“OFF”

7. Press the appropriate Set Temperature button

to set the desired

temperature (at ).
* Each press changes the setting, in the following sequence: No dis-

play (no setting)

...

No display.

(Available range: The range for the setting is 12 °C to 30 °C. The
actual range over which the temperature can be controlled, however,
will vary according to the type of the connected unit.)

8. After making the appropriate settings at Steps 5, 6 and 7, press the Fil-

ter

button

to lock in the values.

To clear the currently set values for the selected operation, press and
quickly release the Check (Clear) button

once.

* The displayed time setting will change to “—:—”, and the On/Off and

temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button

for two seconds or more. The display will begin

flashing, indicating that all settings have been cleared.)

Note:
Your new entries will be cancelled if you press the Mode (Return) button

before pressing the Filter

button

If you have set two or more different operations for exactly the same time,
only the operation with the highest Operation No. will be carried out.

9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells

as you wish.

10. Press the mode (Return) button

to return to the standard control

screen and complete the setting procedure.

11. To activate the timer, press the Timer On/Off button

, so that the

“Timer Off” indication disappears from the screen.

Be sure that the

“Timer Off” indication is no longer displayed

* If there are no timer settings, the “Timer Off” indication will flash on

the screen.

<How to View the Weekly Timer Settings>

1. Be sure that the weekly timer indicator is visible on the screen (at ).
2. Press the Timer Menu button

so that “Monitor” is indicated on the

screen (at ).

3. Press the Timer On/Off (Set Day) button

as necessary to select the

day you wish to view.

4. Press the

Operation button (

) as necessary to change

the timer operation shown on the display (at ).
* Each press will advance to the next timer operation, in order of time

setting.

5. To close the monitor and return to the standard control screen, press

the Mode (Return) button

<To Turn Off the Weekly Timer>

Press the Timer On/Off button

so that “Timer Off” appears at .

<To Turn On the Weekly Timer>

Press the Timer On/Off button

so that the “Timer Off” indication (at )

goes dark.

6.1.2. Simple Timer

■

You can set the simple timer in any of three ways.
• Start time only:

The air conditioner starts when the set time has elapsed.

• Stop time only:

The air conditioner stops when the set time has elapsed.

• Start & stop times:

The air conditioner starts and stops at the respective elapsed times.

■

The simple timer (start and stop) can be set only once within a 72-hour
period.
The time setting is made in hour increments.

Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same

time.

*2. The simple timer will not operate when any of the following conditions is

in effect.
The timer is off; the system is in malfunction state; a test run is in prog-
ress; the remote controller is undergoing self-check or remote controller
check; the user is in the process of selecting a function; the user is in the
process of setting the timer; the system is under central control. (Under
these conditions, On/Off operation is prohibited.)

Op No.

Sunday

Monday

…

Saturday

No. 1

• 8:30
• ON
• 23 °C

No. 2

• 10:00
• OFF

…

No. 8

<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 23 °C.