4
2. Names and functions of various parts
■
Wired Remote-Controller
Display Section
°F°C
°F°C
ERROR CODE
AFTER
TIMER
TIME SU
N
MO
N
TUE
W
ED THU FRI SAT
O
N
OFF
Hr
AFTER
FILTER
FU
N
CTIO
N
O
N
LY1Hr.
W
EEKLY
SIMPLE
AUTO OFF
PAR-21MAA
O
N
/OFF
FILTER
CHECK
OPERATIO
N
CLEAR
TEST
TEMP.
ME
N
U
BACK
DAY
MO
N
ITOR/SET
CLOCK
O
N
/OFF
For purposes of this explanation,
all parts of the display are shown
as lit. During actual operation,
only the relevant items will be lit.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto
Off timer is set.
If the simple or Auto Off timer is set, shows the time
remaining.
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is supported.
“Centrally Controlled” indicator
Indicates that operation of the
remote controller has been prohib-
ited by a master controller.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
“Clean The Filter” indicator
Comes on when it is time to clean
the filter.
“Locked” indicator
Indicates that remote controller but-
tons have been locked.
“Sensor” indication
Displayed when the remote control-
ler sensor is used.
Up/Down Air Direction indica-
tor
The indicator
shows the direc-
tion of the outcoming airflow.
“One Hour Only” indicator
Displayed if the airflow is set to
weak and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after one
hour, at which time the airflow
direction also changes.
Room Temperature display
Shows the room temperature. The
room temperature display range is
8–39°C. The display flashes if the
temperature is less than 8 °C or 39
°C or more.
Louver display
Indicates the action of the swing lou-
ver. Does not appear if the louver is
stationary.
(Power On indicator)
Indicates that the power is on.
Operation Section
Set Temperature buttons
Down
Up
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Back
Ahead
Set Time buttons
Timer On/Off button
(Set Day button)
ON/OFF button
Test Run button
Filter
button
(<Enter> button)
Check button (Clear button)
Fan Speed button
Louver button
(
Operation
button)
To return operation
number.
Airflow Up/Down button
Ventilation button
(
Operation
button)
To go to next oper-
ation number.
Built-in temperature sensor
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
Opening the
door
Note:
“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power fail-
ure.
“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed
if any of the indoor units is equipped with the function.
VN79D580H01.book 4 ページ ２０１８年４月５日 木曜日 午前１０時２分