4
OPERATION OF STAND FAN
Connect the plug into a power supply socket and switch on the power.
Switch on the fan by turning the speed switch
at any of the “1”, “2” or “3”
settings.
Turn the switch from
“1”, “2” or “3” to adjust the fan speed from
Low-Medium-High.
To stop the fans, turn the speed switch
to the “0” position.
To tilt the fan, always ensure that the fan is in off position and wait until
the blade has completely stopped for safety reasons. Hold the stand
firmly with one hand and move the guard gently upwards or downwards.
The oscillation knob is positioned at the top rear side of the motor
housing. Press the knob down to make the fan oscillate or pull it up to
stop the oscillation.
To adjust the height of fan, always ensure that the fan is at off position
and wait until the blade has completely stopped for safety reason. Hold
the inner tube firmly and loosen the height adjustment knob, then push
down or pull up the inner tube to adjust the fan height.
