3
SPECIFICATIONS
Rated Voltage
220-240V~
Rated Power
60W
Frequency
50/60Hz
Blade Size
16”
ASSEMBLY OF STAND FAN
Attach the rear guard to the front side of the motor; fasten the guard
interlocking nut by turning it clockwise until the guard is secured firmly in
place.
Mount the fan blade onto the motor shaft; fasten the blade knob by
turning anti-clockwise firmly.
Installing the front guard:
- Open the front guard clip and attach the hook to the rear guard.
- Push the round edges of front guard to fit it securely into the rear
guard.
- Lock the clip.
Installing the base:
- Insert the outer tube to the base unit firmly. Reverse the whole unit and
secure the outer tube by fitting the molded securing knob from the
bottom of the base unit.
- Connect and fix the inner tube to the outer tube.
- Ensure the outer tube is completely interlocked with the base unit.
- Insert the panel to the inner tube and lock it into position by turning the
panel screw clockwise. Loosen the height adjustment knob to extend
the inner tube to the required height and then tighten the securing
knob.
