PAGE 1
Страница 1: ...PAGE 1 ...
Страница 2: ...1 Assemble horizontal bottom tube 1 into receiver hitch as shown in Fig 1 Tap nut plate 2 inside horizontal tube Align nut with holes in tube Secure tube in receiver using bolt hitch pin 3 5 8 lock washer 4 hair pin 5 2 Assemble angle plates 6 and rubber stop 7 using 1 2 13x3 5 screws 8 1 2 flat washers 9 1 2 13 nuts 10 as shown in Fig 2 Do not completely tighten nuts at this time 3 Slide vertical...
Страница 3: ...8 Secure it on the tube with 1 2 13x3 5 screw 1 2 washers and 1 2 13 nut as shown in Fig 9 Torque nut until top support is able to rotate with slight resistance 9 Lock top support in desired position with hitch pin and lock pin Fig 9 6 Insert rubber straps 15 into openings in mounting plate Fig 6 Pull them through until thicker portion of the strap will stop against bottom of mounting plate It is ...
Страница 4: ...hen tilt carrier away from vehicle Work same way to fold top support After folding top support can be locked in folded position using same pins Folding and tilting are shown on the front page DO NOT TILT BIKE CARRIER OR FOLD SUPPORT WITH BIKES MOUNTED DO NOT TILT BIKE CARRIER WITH Towing Instructions When towing observe the following safety precautions 1 Do not overload maximum Camper Trailer G T ...
