6
Connections
Before connecting the AC power cord to the Mission 778X, please make sure the
Power Switch is in the OFF position. Switch it to the ON position after connecting the
unit to the AC mains.
Mains Input
AUX1
AUX2
The Mission 778X has two sets AUX (unbalanced) inputs for connection to line level
devices. Connect a RCA cable between the AUX of 778X and the line level output of
your source unit (such as a CD player or DAC). Interconnects should be of low-noise
construction and fully screened to minimise hum and noise transmission.
AUX Inputs
PHONO
The Mission 778X has a built-in phono preamplifier and therefore offers a dedicated
phono input. Connect the phono output of your turntable to the phono input of the
778X. The Phono input should only be connected to turntables fitted with MM
cartridges.
Phono Input
COAX
The Mission 778X has a coaxial SPDIF input. Connect an RCA digital interconnect
between the digital coaxial output of the source unit to the COAX input of Mission
778X.
Coaxial Input
OPT1
OPT2
The Mission 778X has two optical SPDIF inputs. Connect an optical (TOSlink)
interconnection between the digital optical output of the source unit to the OPT1 or
OPT2 input on Mission 778X rear panel.
Optical Input
The Mission 778X has a built-in Bluetooth signal processor module which can play
audio files transmitted from the source unit via Bluetooth wireless transmission.
Bluetooth Input
USB
The Mission 778X has a Type-B USB input which lets you connect a MAC or PC to play
audio files stored on your computer.
PC USB
RIGHT
LEFT
Class 2 Wiring
The Mission 778X has two sets of loudspeaker outputs. There are independent for left
and right stereo amplifier outputs. Connect the Positive (+) RED terminals of the
amplifier to the Positive (+) RED terminals of the loudspeaker. Connect the Negative
(-) BLACK terminals similarly. When connecting loudspeakers tighten the terminals
securely by hand. Make sure there are no loose strands of wires which could cause
short circuits.
Loudspeaker Outputs
