manualshive.com logo in svg

Misonix SONICATOR XL2010, Руководство по эксплуатации

Поделиться
Скачать
Misonix SONICATOR XL2010 Скачать руководство пользователя страница 8

Operation Manual

_____________________Description of Major Components

_________________________________________________________________________________________________

4-2

CONVERTOR (TRANSDUCER)

Includes the electroplated housing, and black front driver (first stage of acoustic
amplification) with a ½ - 20 threaded hole for horn attachment.  A separate high-frequency
cable is also furnished.

HORN (PROBE)

A 5" L x 1½" W resonant body that steps down to a ½” diameter probe tip.  The horn serves 
as the second stage of acoustic amplification.  It includes a removable or solid tip, a ½ - 20 
stud for attachment to the convertor and external threads around the body for attachment 
of accessories (e.g. Flow Cells).  The Horn is available in three standard tip diameters of 
½”, ¾” or 1".  In addition, each horn comes in three different tip configurations. Tapped
horns have a replaceable Flat Tip; Solid horns do not have a replaceable tip; and Sapphire
tipped horns have a 1/16" thick sapphire disk bonded to the tip of a solid horn.

REPLACEABLE FLAT TIPS

A ¼” thick, radiating surface attached to the end of the horn.  The flat tips will erode with  use
and are replaceable.  The tips are matched to horns of equal diameter (i.e. ½”, ¾” or 1"
diameter).

Содержание SONICATOR XL2010













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды