PARTS IDENTIFICATION
OPERATION INSTRUCTION
Please follow the instruction carefully. Discard water after first use as this will remove any
materials or dust remaining in the appliance which is caused by the manufacturing
process.
1. Open the lid by pulling the lid upwards and fill the water into the kettle. Then close the
lid otherwise the power will not automatically cut off after water has been boiled.
Caution: Water must be filled between the Max and Min level as indicated on the housing.
Too little water will do damage to the heating element and overfilling the kettle could be
dangerous as boiling water may cause spilling.
2. Place the kettle on the Power Base and connect to power supply. Position the kettle so
that the spout of the kettle is facing away from you.
3. Press down the switch. This will make the lamp illuminate. Water will start to heat up.
Do not remove the lid while the water is boiling.
4. Power will cut out automatically and switch will revert back to the original position once
water has been boiled. Lamp will automatically switch off.
5. The boiling process can be terminated at any time by lifting the kettle off the Base.
CLEANING AND MAINTAIN
1. Remove the plug from outlet and let the appliance cool down before cleaning.
2. Do not immerse power cord, kettle and power base in water.
3. In order to maintain the polish of the outer surface, do not use abrasive cleaner to
wipe the housing.
4. Maintain regular cleaning inside of the inner pot.
How to remove scale
Half fill the kettle with tap water and add the juice of 1 lemon to the water.
Boil this mixture and allow it to stand for 15 minutes. Re-boil this mixture and allow it to
stand a further 15 minutes. Re-boil this mixture a third time then rinse the kettle well..
Lid
Spout
Switch
Handle
Double layers body
Indicator light
Power case
