© 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.
Adjusting bias voltage
Connect BNC inputs to amplifier
Apply 0V to both BNCs or leave them both unplugged
Ensure high voltage is ON by the Enable Override switch on front
panel
Monitor an output pin (e.g. X+) and turn bias-adjusting
potentiometer (next page,) until the output voltage (DC) is at the
desired level.
Double check that all channels, X+ X- Y- Y+, have the same bias.
15
Содержание Bias-Differential Quad-Channel (BDQ) Amplifier 4.x
Страница 10: ...SPECIFIC INSTRUCTIONS BDQ PicoAmp4 x 10...