11
MIR2285
PL / EN
SEQUENCE OF ASSEMBLY
No.
Description
Qty.
No.
Description
Qty.
1
Handle
1
15
Wheel cover
2
2
Cover
1
16
Handle
2
3
Vents adjuster
1
17
Cover suspension
1
4
Grate
1
18
Hook
1
5
Charcoal frames
1
A
M5x10 screw
1
6
Bowl
1
B
M5 nut
1
7
Leg support
3
C
M6x10 screw
5
8
Ash pan frame
1
D
M6 nut
5
9
Ash pan
1
E
M6x25 screw
6
10
Ash pan handle
1
F
Gasket
6
11
Leg with wheel
2
G
M6x30 screw
3
12
Leg
1
H
Leg gasket
3
13
Wire shelf
1
I
Plastic gasket
2
14
Wheel
2
J
Clamping nut
2
1. Place the Leg Support (7) on the legs (11) & (12), then attach them to the bowl (6) one by one, using
the screws (G) and gaskets (H). Remember: place one handle between the two short legs and the
next on the long leg.
2. Attach the wire shelf (13) to the ends of the legs. The curved hook should first be inserted into the
leg slots (12) (curved end facing away from the grill), then align and insert the other end into the
leg with the wheel (11) (make sure the hook that is closest to the end of the leg is on the outward).
Attach a wheel (14) on the wire shelf hooks that pass through the castor legs. Secure with gaskets (I)
and retaining nuts (J) on both sides.
3. Attach the handles (16) to the bowl (6) using the screws (E) and gaskets (F). Attach the ash box frame
(8) to the bowl (6) using the bolts (C) and nuts (D). Fix the ash box holder (10) to the ash box (9) using
the bolts (C) and nuts (D). Attach the ash box (9) to the appropriate frame (8).
4. Attach the handle (1) and the cover suspension (17) to the cover (2) using the screws (E) and gaskets
(F). Place the air vent adjuster (3) on the covers, using the bolt (A) and nut (B).
5. Place the charcoal frames (5) and the baking grate (4) in the bowl (6).
Note:
All screws must be tightened securely.
The grill can be unfolded following the instructions above in the reverse order.
