background image

5A

5A

5B

5B

Note: Step 5B is for the following door 
models only: M36, M37, & 360.

 
Remove the plastic jamb.

Enlarge the holes in the wall by drilling with 1/4” 
(6mm) drill bit.

Insert the wall anchors (T-16).

Reposition the plastic jamb and fasten to the wall with three #8 x 
1-1/2 “ (38mm) screws through the three holes in the jamb.

Do not put screws through the adjusting blocks yet.
Repeat with the other plastic wall jamb.

Note: Step 5A is for the following door 
models only: M33, M34, M35,   M38,   M39, 
M40, & M41.

Fasten to the wall with three #8 X 1-1/2” 
(38 mm) screws through the three holes in the 

Do not put screws through the adjusting blocks   yet.
Repeat with the other plastic wall jamb.

6

T-8
#8 X 1-1/2” (38 mm) 
SCREW

T-7 
PLASTIC 
JAMB

OUTSIDE

T-3 
SILL

INSIDE TUB

T-2
WALL 
JAMB

T-7 
PLASTIC 
JAMB

PLUMB 
LEVEL

T-9
# 8 X 3 “ (76 mm) 
FLAT SCREW

T-3
SILL

INSIDE TUB

OUT

OUTSIDE TUB

#8 x 1 1/2” (38 mm) SCREW

#8 X 3” (76 mm)  SCREW

6

6

Guide each wall jamb (T-2) over the plastic 
jamb and check for plumb with a level.

If adjustment is required, insert a Phillip’s 
screwdriver through the upper or lower hole, 
turning the adjustment screw in or out until the 
jamb is plumb.

When plumb, fasten each wall jamb to the wall using the 
#8 X 3” (76 mm) screw through the hole.

CAUTION:

 Do not over tighten as it may distort the aluminum 

jamb.

T-8
#8 X 1-1/2” (38 mm) 
SCREW

T-7 
PLASTIC 
JAMB

OUTSIDE

T-3 
SILL

INSIDE TUB

#8 x 1 1/2” (38 mm) SCREW

Содержание Miroglide 360 Series

















Отзывы: