MIRKA AIROS, Электрическое руководство

Страница: 6 / 16

6
Mirka® AIROS • 77 mm (3"), 125 mm (5") & 150 mm (6") • Electrical manual
Connector PIN Description
J3 P+ P+
J3 C+ C+
J3 C– C–
J3 P– P–
J3 NTC+ NTC+
J3 Phase A Phase A
J3 Phase B Phase B
J3 Phase C Phase C–
J3 GND GND
J3 NTC- NTC–
Connector PIN Description
J4 COM Relay COM
J4 NO Relay NO
Connector PIN Description
J5 DI1 Digital speed control input bit 1
J5 DI2 Digital speed control input bit 2
J5 DI3 Digital speed control input bit 3
J5 DI4 Digital speed control input bit 4
Connector PIN Description
J6 15V 15 VDC output
J6 GND GND
Button description
Button Description
S1 Self-test button
S2 Reset button
Indicator description
Indicator Description
D2 Speed set-point indicator, lit if ≥ 4,000 rpm. Modbus RTU slave address indicator, bit 1.
D3 Speed set-point indicator, lit if ≥ 5,000 rpm. Modbus RTU slave address indicator, bit 2.
D4 Tool status indicator. Lit red when the tool is stopped, lit green when the tool is running.
D14
Motor drive state indicator. Lit green when motor drive is in ON-state. Blinking green when
motor drive is in OFF-state.
D17 Speed set-point indicator, lit if ≥ 6,000 rpm. Modbus RTU slave address indicator, bit 3.
D18 Speed set-point indicator, lit if ≥ 7,000 rpm. Modbus RTU slave address indicator, bit 4.
D19 Speed set-point indicator, lit if ≥ 8,000 rpm. Modbus RTU slave address indicator, bit 5.
D20 Speed set-point indicator, lit if ≥ 9,000 rpm. Modbus RTU slave address indicator, bit 6.
D21 Speed set-point indicator, lit if ≥ 10,000 rpm. Modbus RTU slave address indicator, bit 7.
D22 Modbus RTU slave address indicator, bit 8.
D23 Lit if D2–D3, D17–D22 indicator mode is Modbus RTU slave address.