MIRKA airos MIA6514112, Электрическое руководство

Страница: 7 / 48

Description PIN Connector
P- P- J3
NTC+ NTC+ J3
Phase A Phase A J3
Phase B Phase B J3
Phase C- Phase C J3
GND GND J3
NTC- NTC- J3
Description PIN Connector
Relay COM COM J4
Relay NO NO J4
Description PIN Connector
Digital spped control input bit 1 DI1 J5
Digital spped control input bit 2 DI2 J5
Digital spped control input bit 3 DI3 J5
Digital spped control input bit 4 DI4 J5
Description PIN Connector
15 VDC output 15V J6
GND GND J6
Button description
Description Button
Self-test button S1
Reset button S2
Indicator description
Description Indicator
Speed set-point indicator, lit if ≥ 4,000 rpm. Modbus RTU slave address indicator, bit 1. D2
Speed set-point indicator, lit if ≥ 5,000 rpm. Modbus RTU slave address indicator, bit 2. D3
Tool status indicator. Lit red when the tool is stopped, lit green when the tool is running. D4
Motor drive state indicator. Lit green when motor drive is in ON-state. Blinking green when
motor drive is in OFF-state. D14
Speed set-point indicator, lit if ≥ 6,000 rpm. Modbus RTU slave address indicator, bit 3. D17
Speed set-point indicator, lit if ≥ 7,000 rpm. Modbus RTU slave address indicator, bit 4. D18
Speed set-point indicator, lit if ≥ 8,000 rpm. Modbus RTU slave address indicator, bit 5. D19
Speed set-point indicator, lit if ≥ 9,000 rpm. Modbus RTU slave address indicator, bit 6. D20
Speed set-point indicator, lit if ≥ 10,000 rpm. Modbus RTU slave address indicator, bit 7. D21
Modbus RTU slave address indicator, bit 8. D22
Lit if D2–D3, D17–D22 indicator mode is Modbus RTU slave address. D23
Lit if digital speed control interface is enabled. D24
Lit if the alarm status flag is set. D25
Relay status indicator. D26
Modbus RTU receive indicator. D29
Modbus RTU transmit indicator. D30
7
en (original)