MIRKA 915 M, Руководство по эксплуатации, Страница: 55 / 184

54
Mirka® Dust Extractor • 915 M Mirka® Dust Extractor • 915 M
55
en
Before plugging a machine into the dust extractor socket:
1. Switch off the dust extractor.
2. Switch off the machine to be connected.
Maintenance, cleaning and repair (F+G+H+I)
During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breathing mask.
Only carry out maintenance work described in the operating instructions. Always pull out the mains plug before clean-
ing and maintenance of the dust extractor. Never spray water on to the upper section of the dust extractor. Danger for
persons, risk or short-circuiting.
The use of non-genuine spare parts and accessories can impair the safety of the dust extractor. Only use spare parts
and accessories supplied by KWH Mirka Ltd.
During maintenance and cleaning, handle the dust extractor in such a manner that there is no danger for maintenance
staff or other persons.
In the maintenance area
• use filtered compulsory ventilation
• wear protective clothing
• clean the maintenance area so that no harmful substances get into the surroundings
Before removing the vacuum cleaner from the area contaminated with harmful substances:
• Clean the outside of the vacuum cleaner, wipe it clean or pack the vacuum cleaner in well sealed packaging
• and avoid spreading deposited harmful dust
During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be:
• packed in well sealed bags
• disposed of in a manner that complies with valid regulations for such waste removal
A dust test must be performed at least once every year by Mirka service center or a trained person. This test includes,
for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment
works properly.
Disposal of filter elements and filter bags
Discard filter elements and filter bags in accordance with the national regulations.
Transport
Before transporting the dirt tank, close all the locks. Do not tilt the dust extractor if there is liquid in the dirt tank. Do
not use a crane hook to lift the dust extractor.
Storage
The dust extractor must be stored in a dry place and protected from frost.
Recycling the dust extractor
As specified in European Directive 2012/19/EC on old electrical and electronic appliances, used electrical
goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest
dealer for further information.
Further Service
Servicing must always be performed by trained personnel. To keep the tool warranty valid and ensure optimal tool
safety and function, servicing must be carried out by a Mirka authorized service centre. To locate your local Mirka
authorized service centre, contact Mirka Customer service or your Mirka dealer.
Warranty
Mirka tools have a two year warranty starting from the date of purchase. By registering your Mirka tool within 30 days
from purchase you will obtain an additional one year warranty.